NETLIST GENERATION

Introduction

A schematic diagram contains two sorts of information: graphical and electrical. The process of generating a netlist is that of extracting the electrical data and writing it in a form that other CAD programs can use. There is no single standard for netlist files; most vendors use a format of their own. EDIF was produced as an international standard but is complex enough that it has never displaced the vendor formats, and no single vendor has become large enough to set a de facto standard. Like many others, we therefore use our own format and provide also for conversion to some of the other file formats in common use.

Our format is called SDF, standing for Schematic Description Format. It is designed to be compact and human readable, and to be easy to read and process from any programming language. SDF is also an open format: the technical specification is available on request from Labcenter technical support.

When working entirely within Proteus you have no real need to know about the netlist format. The capture module creates and maintains a netlist automatically and the layout software reads, manages and verifies that netlist. Knowledge of netlist formats and netlist files is only relevant where you are exporting for reading into a foreign package for PCB layout.

See Also

Schematic and Layout

Generating a Netlist File

Netlist Formats