OTHER LIBRARY MENU COMMANDS
Introduction
Alongside the commands for picking and making parts, the Library menu carries four commands that work on a library as a whole, or on the library parts already placed in a design. They are described briefly here; each has its own dialogue help, and the managed library workflow is documented in full in the Library Manager help file.
Compile To Library
Compile To Library takes the components already placed on the schematic and writes each of them into a device library as a library part. The dialogue form offers only the writable libraries, and lets you choose whether to process the current sheet or every sheet in the design, and whether to hide the component properties and pin numbers on the stored parts. Use it when you have drawn or edited a set of parts in a working design and want to capture the lot into a library in one operation, rather than invoking Make Device on each one in turn.
See Compile Placed Components to Device Library for the dialogue fields.
Place Library
Place Library is the reverse operation. It reads a device library you select and lays every part in it out on as many sheets as are needed, optionally with all the component properties made visible. The parts are placed into a design of their own, so Proteus will offer to close the current project before it runs. This is the quickest way to audit a library by eye: a whole library laid out on screen shows up wrong symbols, missing pin numbers and inconsistent styles far faster than picking the parts one at a time.
See Autoplace Library for the dialogue fields.
Verify Packagings
Verify Packagings walks every component on every sheet of the design and checks that its packaging is sound, reporting anything it finds in a text viewer headed PACKAGING ERRORS. If nothing is wrong it simply tells you that no packaging errors were found. Run it before you hand a design over for layout, and after any bulk edit of the libraries the design draws on, since a packaging fault found on the schematic is very much cheaper to fix than the same fault found in the PCB.
See Packaging Tool Errors for what the individual messages mean, and Packaging for how packagings reach the layout.
Manage Changes
Every project carries its own copy of the library parts it uses, so a part can drift out of step with the library it came from. Manage Changes compares the parts in the design against the current library copies, presents the differences for review, and replaces the parts you accept. It is the reviewer's tool in a managed library workflow, where it is used together with the Pre-Production Check to confirm that the latest approved version of every library part is the one in use.
Full documentation on the managed libraries workflow, including the comparison form itself, is in the Library Manager help file: see Managed Libraries and Working with Library Parts.
See Also: