Goto Position
Overview
This dialogue form allows you to move to specific coordinates on the layout relative to different origins. The command is typically used to position the mouse accurately for placement, and is reached from the View menu with the Goto Position command (CTRL+G).
Two different dialogues are used, and which one opens depends on the coordinate mode currently in force. In cartesian mode you get Goto X-Y Coordinate, with fields for X and Y. In polar mode you get Goto Radial Coordinate, with fields for radius and angle. Polar mode is switched with the Toggle Polar Co-ordinates command on the View menu, shortcut Z.
Options
X Coordinate (Cartesian)
Enter the x-co-ordinate of the absolute position that you want to go to.
Y Coordinate (Cartesian)
Enter the y-co-ordinate of the absolute position that you want to go to.
Radius (Polar)
Enter the distance from the chosen origin to the position that you want to go to. As with other dimension fields you can type an explicit unit; without one the value is read in thou, or in millimetres when the display is in metric mode.
Angle (Polar)
Enter the angle of the position, in degrees, measured anticlockwise from the positive x-axis (three o'clock). Fractional values are accepted, so 22.5 is a valid entry.
Relative to
Choose the origin that the coordinates are measured from. Three options are offered:
- Current Origin, the false origin if you have set one, otherwise the default origin.
- Output Origin, the origin written into the CADCAM and drill files, which is the one to use when you are working to figures supplied by or destined for the board manufacturer.
- Database Origin, the origin internal to the software.
See Also:
Making a Circular Footprint (Tutorial)
Positioning commands will snap the mouse to the current grid after execution. For accurate placement you therefore want to select as fine a grid as possible before executing this command (particularly in polar mode).