ODB++ Output

Overview

The ODB++ format was developed by Valor Systems and combines the information contained in the Gerber, Excellon, Pick & Place and Testpoint Information outputs into one fileset. The ODB++ database also contains a high level representation of the board in terms of the components, packages and netlist.

There are various advantages in using ODB++ rather than the traditional RS274X Gerber formats:

  • ODB++ is a single, standard format, used throughout the PCB manufacturing industry.
  • All the information required to manufacture the bare board including the layer stackup, tool sizes and hole types is included in the database; there is no need for a human readable Tool Information File.
  • The package types, component placement and netlist information are also included so that pick and place and bare board test equipment can be driven from the ODB++ data.
  • Power planes are represented as polygons rather than being rastered; this results in smaller file sizes especially for boards of large physical size.
  • A free ODB++ viewer is available from Siemens EDA, enabling you to validate the output using an independent software package before sending your boards for manufacture.

Using the ODB++ Output Command

The command is Output Menu > Generate ODB++ Database, which opens the ODB++ Manufacturing Output dialogue. This has three tabs: ODB++ Output holds the settings described below, Notes holds the manufacturing notes and contact details, and Log reports the result of the generation.

The ODB++ command is similar to the CADCAM output command although there are slightly fewer options.

  • Job Name, a common filestem for everything produced, together with the Folder it is produced in. This defaults to the layout filestem. Note that the ODB++ format is contained in a directory hierarchy, so the Job Name determines the root folder of the ODB++ database. Both fields accept field codes.
  • Whether the database is written into an ODB++ database folder or collated into a single ZIP archive. Depending on your choice you can then opt to automatically open the output folder or the ZIP file on completion, allowing you to browse the result.
  • Which layers you wish to output for the current design. This will be defaulted automatically based on an analysis of what is contained in the layout.
  • What resolution is used for rastering truetype fonts and bitmaps. Note that unlike CADCAM output, power planes are represented as polygons and are not subject to rastering.
  • Whether to apply a global guard gap (solder resist expansion) across the whole layout, and the clearance to use.
  • Whether or not to launch the ODB++ viewer automatically on production of the files, together with the path to the viewer executable. This option will load the ODB++ database into the viewer on completion, allowing you to inspect the resulting output prior to sending the files to your PCB manufacturer for prototyping.

Manufacturing notes and contact details are entered on the Notes tab. These are placed in the README.TXT generated within the ODB++ database folder. The Notes tab also carries checkboxes for including the Manufacturing Notes and PCB Specification Notes held in the Project Notes module.

The slot layer does not need to be identified. Any cut-out drawn on the Slot layer, and any slotted padstack, is picked up automatically. See Mechanical Routing & Slots for the detail.

A free ODB++ viewer is available from Siemens EDA. You will need to download and install it, and point the viewer field at its executable, before the automatic launch option will work.

See Also:

Gerber Output

Mechanical Routing & Slots