OVERVIEW

Proteus provides a complete and flexible scheme for customising the appearance of your schematics. Everything from graphics styles, text styles, design colours, wire junction dot size and shape, etc. to a pre-configured sheet size, sheet border graphics, company logo and header block can be set up in a design template file.

A design template file has two parts: a built-in repository of graphics and text styles, together with the rest of the design's appearance settings, and a master sheet. When you start a schematic from a design template the styles and settings from the template are applied to the schematic, and the contents of the master sheet in the design template are visible on every sheet in the schematic.

The settings that travel in a template are wider than the styles alone. Alongside the graphics and text styles, a template carries the default font face, the defaults for newly placed 2D graphics text, the junction dot shape and size, the sheet size, the design and animation colours, the grid and hidden object colours, and the graph and trace colours. Two of these catch people out because they look like personal preferences: the graph and trace colours travel in the template, and so do the Show hidden text? and Show hidden pins? switches, although both sit on the Set Design Defaults dialogue form beside settings that are not carried at all.

It follows that there are essentially two steps to creating or modifying a design template file: customising the graphics and text appearance, and customising the master sheet with an appropriate sheet size, border, header, etc. These are discussed in detail in the topics on Graphics and Text Styles and The Master Sheet.

The Template Commands

Two commands at the foot of the Template menu move settings between a design and a template file.

Save Design as Template

Writes the current design's styles, appearance settings and master sheet to a .DTF file. The design sheets themselves are not written; a template holds the master sheet and nothing else of your circuitry.

Apply Styles From Template

Reads a .DTF file and applies its styles and appearance settings to the design you already have open. This is the command to reach for when you want to bring an existing design into your house style.

Apply Styles From Template imports the appearance settings only. The template's master sheet is not brought across, so a design that has no sheet border will still have none afterwards. To pick up the master sheet as well, start a new project from the template.

The Supplied Templates

Proteus ships with eighteen design templates, and these are the entries you see listed when you create a new project. The sixteen sheet size templates each provide a sheet border and a header block on their master sheet, sized to the paper they are named for.

Template Sheet
Landscape A0, A1, A2, A3, A4 ISO A series paper, wider than it is tall.
Landscape US A, US B, US C ANSI A, B and C paper, wider than it is tall.
Portrait A0, A1, A2, A3, A4 ISO A series paper, taller than it is wide.
Portrait US A, US B, US C ANSI A, B and C paper, taller than it is wide.
Sample Design The house template used by Labcenter when authoring the shipped sample designs. You are welcome to use it, but it is included primarily so that the samples share a consistent appearance.
DEFAULT The template used when no other is specified. Save a template of your own under the name default to make your house style the starting point for every new design.

Templates live in the folders named in the Template folders field of the System Settings command on the System menu. More than one folder can be given, which is how a company template set and a personal one can be kept apart.

The same folder also holds files with the extensions .LTF, .pjnt and .bomt. These are layout templates, project notes templates and bill of materials templates respectively; they are not schematic templates and do not appear in the Design Templates list.

See Also:

Graphics and Text Styles

The Master Sheet

Templates Tutorial